***2 Part Primer***
This product requires the following items: 
Urethane Primer 60ml
Urethane Catalyst 15ml
 
Thoroughly intermix before application.
Apply product over sanded surface at least #800-#1000
25-30PSI at the tip
Coat 1 : Medium wet passes
Coat 2 : Wet passes
Coat 3 : Another wet pass
 
Cure for 6-8 hours at room temperature
 
OR
 
Cure for 15-30 minutes at 120F in the dehydrator
 
BEFORE APPLYING ANY BASE COATS, SAND OVER THE ENTIRE SURFACE WITH 1500-2000 WET FOR SILKY SMOOTH SURFACE.
 
CLEAN ALL REMAINING PRODUCT OUT OF THE AIRBRUSH WHEN FINISHED
 
POT LIFE IS ABOUT 2 HOURS.
 
20-30 PSI IS RECOMMENDED.
 
CATALYST CONTAINS DIISOCYNATE. MUST BE USED IN A WELL VENTILATED AREA AND PROPER PERSONAL PROTECTION EQUIPMENT. IMPROPER USE/HANDLING CAN RESULT IN PHYSICAL HARM THROUGH PROLONGED EXPOSURES.
 
HARMFUL VAPORS. 
WEAR ORGANIC VAPOR RESPIRATOR WHEN IN USE. 
USE IN WELL VENTILATED AREA ONLY.
KEEP OUT OF CHILDREN'S REACH
FLAMMABLE , KEEP AWAY FROM ALL HEAT SOURCES.