***2 Part Clear Coat***

This product requires the following items: 

Clear Coat (30mL)

Catalyst (10mL)

Quality acrylic polyol super high solid clearcoat. 60% solid content free of Acetone, Toulene, and Xylene which are commonly used "filler solvents" in low quality middle solid and high solid clearcoats. Extremely good gloss retention with minimal shrinking holding up against polishing and sanding which can quickly reveal the actual quality of clearcoat. 

CATALYST CONTAINS DIISOCYNATE. MUST BE USED IN A WELL VENTILATED AREA AND PROPER PERSONAL PROTECTION EQUIPMENT. IMPROPER USE/HANDLING CAN RESULT IN PHYSICAL HARM THROUGH PROLONGED EXPOSURES.

MIX 3:1

Thoroughly intermix before application.

Recommended Application

25-30PSI at the tip

-1st coat: Light coat

Flash off 5-10 minutes

-2nd coat: Medium to Wet coat

Flash off 5-10 minutes

-3rd coat: Wet Coat

Flash off 5-10 minutes

Cure at room temperature for 48-72 hours before handling/sanding or 60 minutes in dehydrator @120F after cooldown

HARMFUL VAPORS.

WEAR NIOSH APPROVED ORGANIC VAPOR RESPIRATOR WHEN IN USE.

USE IN WELL-VENTILATED AREA ONLY.

KEEP OUT OF CHILDREN'S REACH

FLAMMABLE, KEEP AWAY FROM ALL HEAT SOURCES.